Cleaning Information: Chrome Taps and Showers.

To avoid damage and allow the fittings to look great for as long as possible, it is necessary to consider certain criteria when cleaning.

Cleaning Materials for Mixers and Showers

Cleaning materials are necessary for removing lime, water marks and dirt.

Please pay attention to the following points when cleaning mixers and showers:

  • Never use cleaning materials on or in close proximity which contain hydrochloric, formic, acetic acid or solvents, as these will cause considerable damage.
  • Phosphoric acid is also restricted as it can cause damage.
  • Never mix any cleaning material with another.
  • Never use cleaning materials or appliances with an abrasive effect such as unsuitable cleaning powders, creams or sponge pads.

Cleaning Instructions for Mixers and Showers

  • Wipe with a soft *clean cloth after each use so to stop water marks forming.

Periodic cleaning: Warm soapy water or a manufactured branded bathroom tap cleaning product can be used.

Please follow the cleaning product manufacturer’s instructions.

In addition, pay attention to the following points:

  • Always use a neutral wash solution. i.e. warm soapy water or branded product.
  • The cleaning dosage and time the cleaner needs to take effect should be adjusted according to the product and the cleaner should not be left longer than necessary.
  • Regular cleaning can prevent calcification.
  • Rubber parts should be cleaned regularly with rubber safe cleaning products. i.e. warm soapy water or suitable branded product.
  • Rubber nozzles should regularly and gently rubbed from side to clear any dirt or calcification.
  • When using spray cleaner, spray first into a *clean damp cloth or sponge, never directly onto the sanitary tapware, as drops could enter openings and gaps and cause damage.
  • After cleaning rinse thoroughly with clean water to remove any cleaner residue.
  • Dry with a soft *clean cloth.

Important

Residues of liquid soaps, shampoos and shower foams can also cause damage, so rinse with clean water after using.

If the surface is already damaged, the effect of cleaning materials will cause further damage.

* Dirty cloths can carry grit which can be very hard and scratch highly polished surfaces.

Damage caused by improper treatment will not be covered by our guarantee

Print this information | Close this window